Instrument Tuners

Ten tuners, each with its own headstock and string layout: guitar and alternate guitar tunings, bass, guitalele, ukulele, violin, banjo, mandolin, viola and cello. Pick the one that matches what's in your hands.

Each tuner listens through your microphone and draws the headstock or pegbox of its instrument, so the peg you tap on screen is the one you are actually turning. Guitar, Alternate Tunings, Bass, Guitalele and Ukulele are the fretted family.

Violin, Viola and Cello are the bowed strings, and Banjo and Mandolin round out the plucked ones. Each carries the alternate tunings its players really use.

Mark a tuner once you have used it and this page shows how many of the ten you have done and which are left, in a strip near the top. It stays in your browser only.


Which tuner do you need?

Pick the page for your instrument, then the tuning you want. Every tuner listens through your microphone and shows a headstock or pegbox for each string.

Your instrumentTunings coveredTuner
Guitar (6-string)Standard tuning and Drop DGuitar Tuner
Guitar, other tunings15 open and drop tunings, grouped by categoryAlternate Tunings
Bass guitar (4-string)Standard and Drop DBass Guitar Tuner
GuitaleleA tuning or E tuningGuitalele Tuner
UkuleleRe-entrant, Low G and BaritoneUkulele Tuner
ViolinStandard, Open G, Open D and Cross tuningViolin Tuner
ViolaStandard CGDA, Open C, Fiddle and BaroqueViola Tuner
CelloStandard CGDA and BaroqueCello Tuner
Banjo (5-string)Open G, Double C and SawmillBanjo Tuner
MandolinGDAE across 4 paired coursesMandolin Tuner

For an instrument that is not listed, or to tune to one exact note, use the Chromatic Tuner.

A few habits help with every instrument: tune in a quiet room, play one string at a time and let it ring, and approach the target note from below, tightening the string rather than loosening it, so it holds its pitch. On bowed instruments, use the bow on the open string for a steadier reading. The viola is tuned a fifth below the violin, and the cello an octave below the viola, so use the page that matches your instrument.

Tuner readings are shown in cents, where 100 cents is one semitone. Most listeners hear a string as in tune when it is within about 5 cents of the target. Allow microphone access when the browser asks, choose the tuning you want, then play one string at a time and adjust the peg until the display settles on the target note.


Bars showing the lowest to highest open string of each instrument in standard tuning, from bass at E1 to G2 up to violin and mandolin at G3 to E5, with middle C marked
Open-string ranges in standard tuning, on a pitch scale with middle C marked. Guitalele shown in A tuning.


Frequently asked questions

How does each tuner know which instrument's headstock to show?

Each of the ten pages is built around one specific instrument, with its own headstock illustration and string layout already set up — there's no instrument picker to configure, you just open the page matching what's in your hands.

Do any of these tuners support alternate tunings, not just standard?

Yes, most of them. Guitar Tuner includes a full alternate-tunings mode, and the violin family (Violin, Viola, Cello) and Banjo Tuner each offer their own historically common alternate tunings alongside standard.

Why is there a separate Bass Guitar Tuner instead of just using Guitar Tuner?

A bass has four thicker, lower strings and its own headstock layout, tuned a full octave below a guitar's lowest four strings. Sharing one tuner between the two would mean showing the wrong string count and wrong target pitches for whichever instrument didn't match.