Stuck Pixel Fixer
This free stuck pixel fixer runs a rapid color-noise pattern in a draggable square — position it directly over a stuck pixel and let it run. No download, no app.
RUNS ENTIRELY IN YOUR BROWSER · NOTHING IS RECORDED OR SENT ANYWHERE
Last updated: · Reviewed for accuracy against current browser APIs
BACKDROP (changes the colour behind the square)
On this page
Nudge controls, backdrops and coordinates
The hard part of fixing a stuck pixel isn't running the noise, it's getting the noise onto the right pixel. A pixel on a 24-inch 1080p monitor is about a quarter of a millimetre across, and dragging a square with a mouse or a finger will miss it by a few pixels more often than you'd think. So there are three things here a bare drag-the-box tool doesn't give you. A Tiny square (40 px) that covers only the neighbourhood. Arrow buttons that move it exactly 1 pixel at a time (or 10, with the step switch), and the same from your keyboard once the square is focused. And a readout of the square's centre in screen pixels, so you can write the position down and come back to the same spot tomorrow.
The backdrop buttons are for working out what you're dealing with before you start. Set the backdrop to black, then white, then red, green and blue, and look at the pixel on each. A dot that stays lit on black and shows up bright on every colour is the classic stuck pixel. A dot that's only visible on red is a stuck red subpixel, which is common. A dot that's black on white and on every colour is dead, and no noise pattern will help it.
- Pick a backdrop and find the pixel.
Use black first, then cycle through the colours to see which subpixel is stuck.
- Choose Tiny and drag it close.
Get near the pixel, then use the arrows at 1 px until the dot disappears under the noise.
- Note the x and y readout, then press Start Fixing.
Check the pixel again after 10 minutes.
Two honest limits. On a high-density screen (a laptop or phone with a pixel ratio of 2 or 3), one nudge step is one CSS pixel, which is two or three physical pixels, so you may need to step back and forth to land it. And the coordinates are only meaningful as a note to yourself: they are measured from the top-left corner of the black box above, or from the screen corner in fullscreen. The tool can't see the pixel for you, you still have to.
Stuck red pixel on a monitor: the black, white and colour check
Say a 1920 by 1080 monitor has a single red dot that you only notice on dark content. Set the backdrop to black and the dot is red. Switch to white and it vanishes, switch to red and it vanishes there too. A lit red sub-pixel that is hidden against those two backdrops and visible on black is the usual stuck-on pattern, so it is worth a try.
Back on black, pick Tiny and drag the 40 px square close. Then use the 1 px arrows until the dot disappears under the noise. Say the readout shows “Square centre: x 718, y 436”. Write that down, press Start Fixing, and leave the square alone. At 10:00 the status line says you have reached the recommended minimum. Stop, check the pixel on black, and one of two things happens. It is gone or much dimmer, and you are done. Or it is the same red, which very often just means the square was a pixel or two off, so nudge it again and run another 10 to 20 minutes. The timer keeps counting toward the 60:00 limit the page suggests.
The case this will not help is a dot that is black on white, black on red and black on every other backdrop. That is a dead pixel, and no noise pattern changes it. If the red dot is still there after about an hour at the right spot, treat it as permanent and look up the maker's pixel policy instead.
How to use the stuck pixel fixer
- Find the stuck pixel first.
Use a black background to spot a bright stuck pixel clearly before you start.
- Click "Start Fixing."
The square fills with rapid, random color noise — this is the pixel exercise pattern doing its work.
- Drag the square directly over the stuck pixel.
Positioning matters — the effect only really works on the exact pixel underneath the noise.
- Use fullscreen for pixels near the edge.
Fullscreen gives you the entire screen to position the square anywhere, including corners.
- Let it run for at least 10 minutes.
The timer tracks your session — check the pixel once you hit the recommended minimum.
- Repeat up to about 60 minutes for stubborn pixels.
If it's still not fixed after an hour total, this tool likely can't resolve that particular pixel.
Stuck is not dead — check which one you actually have
Before spending 10, 30, or 60 minutes running this tool, it's worth confirming what you're actually dealing with, since the two look similar but respond completely differently to fixing attempts.
| Type | Appearance | Can this tool help? |
|---|---|---|
| Stuck pixel | A bright dot — red, green, blue, or a mix — that stays lit when everything around it changes | Yes, often — this is exactly what it's designed for |
| Dead pixel | Always black, no matter what's displayed | No — there's no power reaching it to influence |
If you're not sure which one you're looking at, our Dead Pixel Test fills your whole screen with solid colors, making it much easier to tell — a stuck pixel stands out clearly against a matching solid background, while a dead pixel stays black even against white.
How this actually works
Inside an LCD or OLED panel, each pixel is switched on and off by a tiny transistor. A stuck pixel's transistor is still receiving power — it just isn't responding correctly to the signal telling it to change color, so it stays frozen on whatever value it happened to lock onto.
This tool exploits that by rapidly cycling through random colors — genuine per-pixel noise, not just a handful of solid colors in sequence — many times per second, directly on top of the stuck pixel. The idea is that repeatedly forcing the transistor to attempt every possible state, over and over for an extended period, can sometimes jolt it back into switching normally. It's not a guaranteed fix and nobody fully understands why it works on some pixels and not others, but it's harmless to try and has helped plenty of people avoid an unnecessary repair or replacement. It's the same underlying transistor speed that governs ordinary motion clarity — if you're curious how sluggish pixel response shows up during normal use rather than as a single frozen pixel, our Ghosting Test covers that.
Getting the best results
- Positioning is everything. The noise pattern only exercises the exact pixels underneath it — a square that's a few pixels off the stuck one is doing nothing useful.
- Zoom in if you can. If your browser or OS supports it, zooming in slightly can make it easier to confirm the square is precisely covering the stuck pixel before you commit to a long session.
- Use fullscreen for edge and corner pixels. The windowed view can't always reach every part of the screen, especially near the very edge.
- Be patient. Many people see results within the first 10 minutes, but some stuck pixels take multiple sessions over 30–60 minutes total.
- Keep the device awake. Adjust your sleep or screensaver settings before a long session so the screen doesn't dim or turn off partway through.
How long to run it, realistically
| Session length | What to expect |
|---|---|
| 10 minutes | A reasonable first attempt — many fixable stuck pixels respond within this time |
| 30 minutes | Worth trying if the first attempt didn't fully resolve it |
| 60 minutes | A reasonable upper limit — if nothing has changed by here, this method probably won't help this pixel |
| Multiple sessions over days | Some people report success after repeated attempts on separate days, though results vary |
If it doesn't work
Some stuck pixels simply don't respond to this technique, and that's worth accepting after a genuine effort rather than running it indefinitely. If an hour or so of attempts hasn't helped, a couple of options remain: the gentle pressure method (turning the screen off, pressing very lightly on the spot with a soft cloth for a few seconds, then turning it back on) works for some people, though it carries a small risk if too much pressure is used. Beyond that, it comes down to your manufacturer's or retailer's own dead/stuck pixel policy — some will repair or replace a screen with a single stuck pixel, many require a higher number of defects before they'll act, and it's worth checking that policy specifically rather than assuming.
Frequently asked questions
How do I fix a stuck pixel?
Click Start Fixing, drag the noisy square so it sits directly over the stuck pixel, and leave it running for at least 10 minutes. Check the pixel against a black background afterward.
Will this fix a dead pixel?
No. A dead pixel has no power reaching it at all, so there's no way for a color-cycling pattern to influence it. This tool only has a realistic chance with stuck pixels — ones that are lit but frozen on a single color.
How long should I run the fixer?
Start with at least 10 minutes and check the pixel. If it's still stuck, longer sessions of 30 to 60 minutes give a better chance. If an hour of total runtime hasn't helped, that pixel likely won't respond to this method.
Why does exact positioning matter so much?
The rapid color cycling only exercises the pixels directly underneath the noise pattern. If the square is even slightly off the stuck pixel, it isn't being exercised at all, no matter how long you leave it running.
Is it safe to leave this running for a long time?
Yes. Displaying rapidly changing colors is normal use for any screen. Just make sure your device won't go to sleep or dim during the session.
What's actually happening when this works?
A stuck pixel's transistor is receiving power but frozen in one state. Rapidly and repeatedly forcing it through every color can, in some cases, jolt it back into switching normally, though this isn't guaranteed.
Can I use fullscreen for a pixel near the edge of my screen?
Yes. Fullscreen mode gives you the entire display to drag the square into, including corners and edges that might not be reachable in the smaller windowed view.
Does this work on phones and TVs, not just monitors?
Yes, the same technique works on any screen you can open a browser on and position the noise square over, including phones, tablets, laptops, and smart TVs with a browser.
What if the fixer doesn't work after an hour?
At that point the pixel is unlikely to respond to software methods. You can try the gentle pressure method, or contact the manufacturer about a repair or replacement depending on their pixel-defect policy.
How do I place the noise square exactly on a stuck pixel?
Pick the Tiny square, drag it close to the pixel, then use the arrow buttons (or the arrow keys with the square focused) to move it 1 pixel at a time until the dot disappears under the noise. Switching the backdrop between black, white, red, green and blue helps you see which colour is stuck, and the coordinate readout lets you note the position for later sessions.
More tools on ProDeviceTest
Troubleshooting a whole screen rather than just a stuck pixel? These run the same way — instant, no download, right in your browser.
- Dead Pixel Test — check your whole screen for dead, stuck, or hot pixels
- Refresh Rate Test — measure your screen's actual Hz
- Screen Uniformity Test — check for clouding, vignetting, and tinting
- Gradient Test — check color banding and bit-depth issues
- All Display Tests — the full category
- Dead Pixel vs Stuck Pixel — how to tell them apart
